LUND Genesis Serie Instrucciones De Instalación página 4

Installation Steps
7
Center the frame on the truck. Next, center the side rail system from side to side.
For ease of installation the side rails have
been marked with the clamp locations.
Place a clamp centered at each of the
locations marked on the side rails.
Insert the upper clamp all the way into the
side rail and tighten with the allen wrench
8
(G) provided.
The bow rests upon the top of the clamp
with each of its legs draped over the
sides.
Some truck boxes are not square and
require bows of different lengths. On
these trucks the bows will be marked as
Bow 1, Bow 2, etc.
9
The location closest to the cab is bow 1.
Unroll cover.
10
C
For application with bed liners refer to the bed liner instruction in Frame #12.
B
A
PAGE 4 of 6
G
C
F
D
F
1703096
Rev.4