Safety Precautions; Installation Precautions - Yeyian SIGURD 2503 Manual Del Usuario

The terms HDMI®, HDMI® High-Definition Multimedia Interface, and the HDMI® Logo
are trademarks or registered trademarks of HDMI® Licensing Administrator, Inc.
WARNINGS
POWER
Only use the power unit provided to power the device. Check mains rating before
plugging the power unit in.
Do not pull the cable to unplug the device.

SAFETY PRECAUTIONS

Keep the device away from rain and humidity to prevent risk of fire and
electrocution.
Do not introduce material (solid or liquid) inside. If this should accidentally occur,
disconnect the device from the mains and have it inspected by qualified personnel.
Never open the device. In all cases, contact the qualified personnel or authorized
service center for repairs.
Keep the device away from children, to prevent accidental damage.
Do not touch the device with wet hands to prevent electrical shock or mechanical
damage.
Do not use the device if it should fall or the external casing is damaged. Risk of
electrocution if the device is used in such conditions. Contact the retailer or
authorized installer.
It is advisable to disconnect the power wire if the monitor is not used for a certain
time.

INSTALLATION PRECAUTIONS

To prevent overheating the device, arrange it in a position allowing the flow of air
through the slots in the casing. Ensure at least 5 cm of free space when installing
inside a rack. For the same reason, do not install near sources of heat, such as
radiators or hot air ducts.
Keep away from direct sunlight. Do not install in areas subject to excessive dust,
mechanical vibrations or shocks.
Do not arrange this device on an unstable surface, such as a tottering or slanted
table. The device could fall causing injury or mechanical failures.
Do not install the device in a place where it could be exposed to humidity or