K'Nex PIRATE SHIP PARK 15139 Instrucciones De Montaje página 56

Tabla de contenido

Publicidad

1. If your model is not working, check the instructions to see if the model
is built correctly.
2. Motor not working?
Check to see if you have fresh batteries inserted with the correct polarity.
If it is still not working, call our Consumer Hotline at 1-800-KID KNEX (USA & Canada only).
Check out
www.knex.com
contact K'NEX Industries, Inc.
3. Are the K'NEX toggles and orange Cams installed exactly as shown?
(See pages 20 & 23)
4. Sound Module not working?
Make sure the button cell batteries are fresh.
Make sure the Ship is making a full revolution around the axle to activate the Sound Module.
Sound will be activated when the Ship makes a full circle revolution.
5. Pirate figures flying off?
Make sure all Pirate figures are fully snapped into the seats before turning on the motor.
6.
Pirate Ship Ride
model moving across the floor?
Be sure to attach the suction cups to the bottom of the frame. (See page 26)
7.
Pirate Ship Ride
model: Ride not making a complete revolution or
spins continuously?
A.
Turn motor off before making any adjustments.
B.
Make sure the batteries are fresh.
C.
Keep frame parallel. Spread the Connectors out to the end of the blue Rods and retest
your model. (See page 17 & 19)
D.
The motor may need to shift slightly one way or the other along the black Rods.
Add or remove 1 blue Spacer from each black Rod that passes through the motor. Slide the
motor towards the remaining Spacers and retest your model. Continue adding or removing
one Spacer at a time until the model swings back and forth and then loops. (See page 9)
E.
The motor may need to shift slightly one way or the other along the orange Rod. (See page 9)
Remove 1 Spacer and add it to the opposite end of the orange Rod and retest your model.
Continue moving Spacers to the opposite end of the orange Rod until the model swings
back and forth and then loops.
56
"Building Help"or turn to the back cover for other ways to
=
Move
Spacers
on orange
Rod
E
Keep
frame
parallel
C
Add
Spacers
to black
Rods
D
Remove
Spacers
from black
Rods

Publicidad

Tabla de contenido
loading

Productos relacionados para K'Nex PIRATE SHIP PARK 15139

Este manual también es adecuado para:

Pirate ship park 11868

Tabla de contenido