Other Bluetooth Functions; Radio Operation - ELBE HIFI 1007 BT Manual De Instrucciones

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

Resuming Bluetooth Connections

HIFI-1007-BT can store pairing information for up to seven devices and recall it at any time, allowing a

portable device to reconnect whenever HIFI-1007-BT is powered on, or when a device comes into

communication range. Once initial pairing is completed, re-pairing of devices is not necessary. If an eighth

device is paired, the pairing information for the first device is overwritten.

Automatic or manual reconnection of your mobile phone or other Bluetooth device depends on the

reconnection settings of that device. If automatic reconnection is preferred, ensure that the device is

configured to reconnect automatically - typically a device will give the option of automatic reconnection,

manual reconnection, or "Ask" reconnection, where the device will request authorization to reconnect.

Please refer to the user manual of your connected device for details.

Disconnecting Devices

All active Bluetooth connections can be terminated in the following way:

Press the FUNCTION button repeatedly until the main display shows "TUNER".

MW(AM) or FM frequency will appear on the display.

Press the

/BAND button to switch between the MW(AM) and FM bands.

Tune to the desired station as follows:

Manual Tuning

Repeatedly press the

frequency of the desired station. Use the Manual Tuning method to tune to weak or distant stations that

are not strong enough to be recognized by the Automatic Tuning system.

Automatic Tuning

Depress and hold the

release the buttons. The Tuner will search up or down the band for the next strong signal and stop on

that station. Repeat this procedure until the tuner stops on your desired station.

FM Stereo signal is indicated by the "ST" indicator.

If the FM Stereo reception is noisy or weak:

Press the ST/MONO/ID3 button on the remote control to select FM

Mono mode.

All manuals and user guides at all-guides.com