KRAFTWERK 505.003.170 Manual De Uso Y Mantenimiento página 25

Low beam vertical inclination for a working height
higher than 80 cm, reference vertical inclination
must be at least 1.5%
LOW BEAM CHECK
Image above is displaying a correct adjusted low
beam.
If light projection should be displaced above or
below and left or right towards the HV main
reference line, adjustment must be done till
reconducting the image as above display
HIGH BEAM CHECK
Image above is displaying a correct adjusted high
beam.
If light projection should be displaced above or
below and left or right towards the HV main
reference line, adjustment must be done till
reconducting the image as above display
FOG BEAM CHECK
Image above is displaying a correct adjusted fog
beam.
If light projection should be displaced above or
below and left or right towards the HV main
reference line, adjustment must be done till
reconducting the image as above display.
NB: on conventional basis reference vertical value
for fog beam has to be considered – 2%
INTELLIGENT BEAM – ADDED SEGMENT
DLA – DYNAMIC LIGHT ASSISTANCE
Intelligent beam can also include added beam
projection to low beam and high beam ones.
DLA is a function to be activated through specific
scan tool through EOBD.
Usually all car
determines values to be respected in such a
projection position: check is linked to the position
in the horizontal/vertical deviation.
25
manufacturer/EOM clearly