Nexigo PJ10 Manual De Usuario página 20

DLNA - SHARE THE DISPLAY OF YOUR DEVICE THAT SUPPORTS
DLNA CONNECTIONS
To connect with DLNA, as with the other steps, first ensure that both
devices are connected to the same network. On the projector, select
DLNA from the options. On the device you want to cast from, open
an app that supports casting, YouTube is an example, and then tap
the button on the app that allows you to cast. Select "NexiGo-PJ10"
from the list of options. Press the play button on the video, and it
will now display the video via the projector.
CAST SETTINGS - CHANGE CASTING SETTINGS. SETTINGS ARE
LISTED BELOW
WiFi Setting: Setup the WiFi connection for the projector.
Online Update: Update the casting firmware. (This is a separate
update from the primary projector firmware update that you will
find in the projector settings. This firmware will automatically
update, so this is only needed in case of an error with the auto
updater)
US 19