Cleaning And Maintenance - MSW BIMINI TOP Manual De Instrucciones

9. Turn the canopy structure 180° and place it in the frame brackets, then use
the wing bolts and hex nuts to install on the boat. Finally, attach all the straps
to the strap holders.

3.3. Cleaning and maintenance

a) Use only non-corrosive cleaning agents for cleaning the surfaces.
b) After each cleaning, all the parts should be dried well before the unit is used
again.
c) Store the unit in a dry and cool place protected from moisture and direct
sunlight.
d) Perform regular inspections of the unit checking technical fitness and any
damages.
e) Use a soft cloth for cleaning.
f) Do not use sharp and/or metal objects (e.g. a wire brush or metal spatula) for
cleaning, as these may damage the surface of the material from which the unit
is made.