S&P TD-MIXVENT Serie Manual Del Usuario página 12

All manuals and user guides at all-guides.com
Instructions Manual
ENGLISH
Instructions Manual
Thank you for placing your confidence in S&P by buying this product. It has been
manufactured following current technical safety regulations and in compliance with EC
ENGLISH
standard.
Thank you for placing your confidence in S&P by buying this product. It has been
Please read this instructions booklet carefully before installing or starting up the product.
manufactured following current technical safety regulations and in compliance with EC
It contains important information on personal and user safety measures to be followed
standard.
while installing, using and carrying out maintenance work on the equipment. Once the
Please read this instructions booklet carefully before installing or starting up the product.
product has been installed, please hand in this booklet to the end user.
It contains important information on personal and user safety measures to be followed
Check that the apparatus is in perfect condition while unpacking. Any fault or damage
while installing, using and carrying out maintenance work on the equipment. Once the
caused in origin is covered by the S&P guarantee. Please make sure that the apparatus
product has been installed, please hand in this booklet to the end user.
coincides with the product you have ordered and that the details on the instructions
Check that the apparatus is in perfect condition while unpacking. Any fault or damage
plate fulfil your necessities.
caused in origin is covered by the S&P guarantee. Please make sure that the apparatus
coincides with the product you have ordered and that the details on the instructions
Transport and manipulation.
plate fulfil your necessities.
The packaging used for this apparatus has been designed to support normal
-
transporting conditions. The apparatus must always be transported in its original
Transport and manipulation.
packaging as not doing so could deform or damage the product.
The packaging used for this apparatus has been designed to support normal
-
The product should be stored in a dry place in its original packaging, protected from
transporting conditions. The apparatus must always be transported in its original
-
dust and dirt until it is installed in its final location. Do not accept delivery if the
packaging as not doing so could deform or damage the product.
apparatus is not in its original packaging or shows clear signs of having been
The product should be stored in a dry place in its original packaging, protected from
-
manipulated in any way.
dust and dirt until it is installed in its final location. Do not accept delivery if the
Do not place heavy weights on the packed product and avoid knocking or dropping it.
apparatus is not in its original packaging or shows clear signs of having been
-
manipulated in any way.
Important information for the safety of installers and users.
Do not place heavy weights on the packed product and avoid knocking or dropping it.
Installation must only be carried out by qualified persons.
-
-
Make sure that the installation complies with each country's current mechanical and
Important information for the safety of installers and users.
-
electrical norms.
Installation must only be carried out by qualified persons.
-
Once ready to use, the apparatus must fulfil the following standards:
Make sure that the installation complies with each country's current mechanical and
-
-
Standard for Low Pressure Instalments 2006/95/CE.
electrical norms.
Standard for Electromagnetic Compatibility 2004/108/CE.
Once ready to use, the apparatus must fulfil the following standards:
-
Ventilators, or apparatus that include them, have been designed to move the air in
Standard for Low Pressure Instalments 2006/95/CE.
-
the area stipulated on their characteristics plate.
Standard for Electromagnetic Compatibility 2004/108/CE.
This apparatus must not be used in explosive or corrosive atmospheres.
Ventilators, or apparatus that include them, have been designed to move the air in
-
-
If a ventilator is going to be installed to extract air from premises where a boiler or
the area stipulated on their characteristics plate.
-
other combustion apparatus are installed, make sure that the building has sufficient
This apparatus must not be used in explosive or corrosive atmospheres.
-
air intakes to assure adequate combustion. The extractor outlet must not be
If a ventilator is going to be installed to extract air from premises where a boiler or
-
connected to a duct used to exhaust smoke or fumes from any appliance that uses
other combustion apparatus are installed, make sure that the building has sufficient
gas or any other type of fuel.
air intakes to assure adequate combustion. The extractor outlet must not be
- This appliance can be used by children aged from 8 years and above and persons This appliance is not intended for use by young children or infirm persons unless
connected to a duct used to exhaust smoke or fumes from any appliance that uses
-
they have been adequately supervised by a responsible person to ensure that they with reduced physical, sensory or mental capabilities or lack of experience and
gas or any other type of fuel.
can use the appliance safely. Young children should be supervised to ensure that knowledge if they have been given supervision or instruction concerning use of the
This appliance is not intended for use by young children or infirm persons unless
-
they do not play with the appliance
appliance in a safe way and understand the hazards involved. Children shall not play
they have been adequately supervised by a responsible person to ensure that they
with the appliance. Cleaning and user maintenance shall not be made by children
can use the appliance safely. Young children should be supervised to ensure that
Safety during installation.
without supervision.
they do not play with the appliance
Make sure there are no loose elements near the ventilator, as they could run the risk
-
of being sucked up by it. If it is going to be installed in a duct, check that it is clean of
Safety during installation.
any element that could be sucked up by the ventilator.
Make sure there are no loose elements near the ventilator, as they could run the risk
-
When installing an apparatus, make sure that all the fittings are in place and that the
of being sucked up by it. If it is going to be installed in a duct, check that it is clean of
-
structure which supports it is resistant enough to bear its weight at full functioning power.
any element that could be sucked up by the ventilator.
Before manipulating the apparatus, make sure the mains supply is disconnected,
When installing an apparatus, make sure that all the fittings are in place and that the
-
-
even if the machine is switched off.
structure which supports it is resistant enough to bear its weight at full functioning power.
Before manipulating the apparatus, make sure the mains supply is disconnected,
-
even if the machine is switched off.