Safety Instructions; Residual Hazards - Lenze E84AZESM Serie Instrucciones Para El Montaje

2

Safety instructions

Residual hazards

2 Safety instructions
2.1 Residual hazards
{
Danger!
Dangerous electrical voltage
All power terminals remain live for up to three minutes after mains
disconnection.
Possible consequences:
ƒ
Protective measures:
ƒ
ƒ
(
Stop!
Dangerously high temperatures
The filter is not protected against mains phase failure. In the event
of a mains phase failure, the filter may become very hot.
Possible consequences:
ƒ
ƒ
Protective measures:
ƒ
ƒ
34
All manuals and user guides at all-guides.com
Death or severe injuries when touching the power terminals.
Switch off the power supply and wait for at least three minutes
before working on the power terminals.
Make sure that all power terminals are deenergised.
Destruction of the device.
Smouldering or open fire.
Change the setting for code C00565 from "Warning" to "Fault" or
select a wiring for the bMctrlMainsFault status output
(LS_DeviceMonitor) system block which causes the system to
shutdown within one minute if said output is set to HIGH.
l
EDK84AZESxx DE/EN/FR/ES/IT 3.0