JANE Montecarlo R1 Instrucciones página 15

Place your MONTECARLO R1 on the vehicle seat in accordance with the
advice and warnings contained in the "WARNINGS" chapter.
Before installing the safety seat find the LATCH anchors on the vehicle
seat. Once you have found them, position the MONTECARLO R1 so
that the rigid anchors (11) are pointing towards the LATCH anchors
of the vehicle.
2d Press the rigid anchors towards the vehicle seat until they both
lock, check that the green signal is displayed on the two LATCH re-
lease buttons (12).
2e Keep pressing firmly until the booster seat touches the backrest of
the vehicle seat. Make sure that it is securely held by pulling the seat.
2f Place the child in the MONTECARLO R1 and make sure that he/she
is sitting well back, pass the seat belt over him and fasten it.
All manuals and user guides at all-guides.com
2d
2e
2f
15