RECOMMENDED TOOLS
SILICONE
LEVEL
13
14
WARNING: Safety glasses should always be worn when working with tempered glass.
BEFORE YOU BEGIN
CAUTION: Risk of injury or product damage. Unframed tempered glass should not contact hard
surfaces or it may shatter. Do not touch the edge of the tempered glass panel with tools or any hard
objects. Do not set the unframed tempered glass edge directly on the floor.
CAUTION: Risk of injury or product damage. Do not attempt to cut tempered glass. Tempered glass
shatters when it is cut.
CAUTION: Risk of product damage and properly damage. This shower door is very heavy, Do not install
it to plastic shower modules or drywall unless additional support is provided behind the wall.
IMPORTANT NOTE: This door requires a 3" wide flat surface for proper installation.
Before starting the installation, lay out and identify all of the parts. Inspect them for damage.
Closely follow the instructions pertaining to the sealant application on the door.
Sealing areas other than those shown may cause leakage.
Two people should perform this installation.
DRILL
TAPE MEASURE
PENCIL
SCREW DRIVERS
RUBBER MALLET
HEX KEYS
- 2 -
1/4" (6mm)
3/16" (8mm)
DRILL BITS
KNIFE
INSTALL ROD
POSITIONER