Turbo Function; Restore Factory Settings - KROM KEXAL Manual De Instrucciones

EN
EXTRA BUTTONS & MAPPING FUNCTION
Mapping the extra buttons:
Side buttons S1 / S2 and bottom buttons S3 / S4 are configurable.
Each button can be mapped to replicate another individual button or a combination of up to 10
actions maximum. They will be recorded in the internal memory of the gamepad.
Mapping method:
1. Press and hold the desired button (S1, S2, S3 or S4) and the START button at the same
time, release the buttons once the LED has lightly flashed.
2. Press the button or buttons to be replicated up to a maximum of 10 among the following (A,
B, X, Y, L1, L2, L3, R1, R2, R3, UP, DOWN, LEFT, RIGHT)
3. Press the button to be mapped again to confirm and exit the mode, the LED that was
flashing will stop flashing.
Clear mapped buttons:
1. Press and hold the desired button (S1, S2, S3 or S4) and the START button at the same
time, release the buttons once the LED has lightly flashed.
2. Press the mapping button again to cancel and delete the previously recorded info.

Turbo function:

1. Turbo functions is available for A, B, X, Y, L, R, ZL, ZR buttons.
2. Press and hold the chosen button and then lightly press the TURBO button.
TURBO mode will now be on.
3. Press and hold the chosen button and then lightly press the CLEAR button.
TURBO mode will now be off.
4. The TURBO functions have no memory so they will reset every time you turn off
the gamepad.

Restore factory settings:

Press and hold the S3, S4 and START buttons at the same time for 3 seconds.