Heating
For reheating bread that has already
been toasted.
1. The toasted bread is in the
toaster.
2. Press the lever down.
3. Press Reheat
(the button lights up).
→ Reheat the toasted bread at
low power.
→ The appliance starts the
process automatically.
Stop / Clear
For premature termination of the
toasting process. Roll attachment
(removable). Do you want to warm up or
toast rolls?
1. Fold down the metal hooks of the
roll attachment.
2. Place the roll attachment on the
toasting tray.
NOTE
•
Do not overload the toasting
attachment! Place a maximum of one
roll on the toasting attachment!
•
Set the selector switch for the
browning level only to maximum
level 3.
•
Take a break of one minute between
toasting.
•
Do not spread the roll with fat or
butter. Fat can drip down and ignite!
Storage
As the housing and metal parts become
hot during operation, allow the appliance
to cool down before putting it away.
•
Clean the appliance as described and
allow it to dry completely. We
recommend storing the appliance in
its original packaging if you do not
intend to use it for a long period of
time.
•
Always store the appliance out of the
reach of children in a well-ventilated
and dry place. You can wind the
mains power cable on the bottom
part.
9 Cleaning and
maintenance
WARNING
•
Always disconnect the mains plug
from the socket and allow the
appliance to cool down before
cleaning.
•
Do not immerse the appliance in
water! It could cause electric shock
or fire.
Cleaning the appliances
Do not use harsh or abrasive cleaners.
Only use a moderately damp cloth for
external cleaning of the appliance. The
crumb tray is located on the opposite
side of the lever.
• Pull out the crumb tray by the
handle, remove the breadcrumbs
and push the tray back in.
EN
Page | 15