Functions; Before Use; Use; Power Button - Wilfa FRESH AP-100CW Manual De Instrucciones

FUNCTIONS

Improve your indoor air quality with your new Air Cleaning System. Multiple
levels of cleaning include a combination of Pre-filter that traps big particles,
HEPA filter that captures micro particles UV-C lamp technology enhances
germ-killing.
• Pre-filter: Captures initial dust like hair and pet dander.
• H13 Hepa filter: Captures tiny dust, smoke, pollen, and other allergens.
• Activated carbon filter: Removes odours and bad smells.
• UV-C lamp: Destroys micro-organisms such as germs, viruses, bacteria, and
fungi (such as mold toxins. You still need to clean and replace filter, but the
light can help to prolong the filter lifetime and clean the circulating air).

BEFORE USE

1. Remove the air purifier from the box and the plastic bag.
2. Select a flat, level surface for the air purifier. For best air flow, place the
unit at least 30cm from any wall or furniture. Make sure the air outlet is not
blocked.
3. Plug the power cord into a right voltage AC outlet.
Important: When moving the unit, always lift it firmly with both your hands.

USE

POWER BUTTON

• Press the button to turn the unit on/off.
• Press and hold this button for 3-5 seconds, and it enters Wi-Fi connection
mode. Connect* the app on your smart phone with the device. The Wi-Fi
indicator light flickers, when the connection is made, the indicator light stops
flickering.
* Follow instructions on the connection flyer. Requires a 2,4GHz Wi-Fi network.
SPEED BUTTON
There are 4 fan speeds. Press the button to switch between the 4. In turbo all the
indicator lights light up.
AIR PURIFIER · AP-100CW
7
EN