Tabla de contenido
Publicidad
Parts of The Cool Mist Humidifier
1. Air Outlet
2. Water Reservoir
3. Transducer
4. Main Housing
5. Night Light Button
6. Water Level Sensor
7. Power Indicator/Low Water Level
8. Output Controller
9. Mist Outlet
10. Essential Oil Wick
11. Essential Oil Reservoir
12. Tank Carry Handle
13. Water Tank
14. Tank Sealing Cap/Valve
1
2
3
4
5
OPERATING INSTRUCTIONS
Always UNPLUG the humidifier before filling.
Fill the water tank
1. Remove the tank from the base of the humidifier. Turn the water tank upside down.
2. Remove the tank sealing cap/valve by unscrewing counter-clockwise.
3. Fill the tank with clean, cool, tap water or distilled water.
4. Replace the tank cap/valve by screwing clockwise tightly.
5. Replace the tank in the base of the humidifier.
6. Within a few seconds the base of the humidifier will fill up with water and be ready to operate.
1
2
6
7
8
3
4
9
10
11
12
13
14
5
2
Publicidad
Tabla de contenido
