6. MAINTENANCE
Only use the specified spare parts for maintenance.
The manufacturer cannot be held liable for any accident
occuring following repairs carried out by a third-party to
its after-sales service or approved repairers.
(A)
6.1
CHANGING THE BATTERY
Always remove the probe before opening the thermometer.
The 9V battery can be accessed at the back of the device.
Take out screw (A) to remove the cover.
Change battery (B) (9V type 6F22).
Warning : the battery connector must be on the opposite
side to the screw.
Put the cover back and screw on.
6.2
STORAGE
If the thermometer is not used for a period exceeding 60 days,
remove the battery and store it separately.
6.3
CLEANING
Use a cloth dampened with soapy water to clean the casing.
Wipe over with a damp cloth. Dry quickly with a dry cloth or dryer.
6.4
METROLOGICAL CHECK
Like all measuring or testing devices, the
instrument must be checked regularly.
This instrument should be checked at least once a year. For
checking and calibration, contact one of our accredited
metrology laboratories (information and contact details available
on request), at our Chauvin Arnoux subsidiary or the branch in
your country.
(B)
26