Manual Operating Mode - Nedo PRIMUS2 H2N Manual De Instrucciones

EN Operating instructions
34

7.2 MANUAL operating mode

NOTE
In MANUAL operating mode the laser does not detect any vibrations and
does not level itself horizontally.
AUTOMATIC opera- Set MANUAL opera-
ting mode is active ting mode
Use the button to switch to MANUAL operating mode immediately after switching
on .
MANUAL operating mode is active. The following functions can be invoked:
Use the button to switch to AUTOMATIC operating mode (Chapter 7.1).
The laser re-levels itself horizontally.
Use the button to exit the operating mode, switch off the laser.
The hand symbol is
displayed