Laser Receiver Commander 2 H2N/H2N; Displays And Controls Of The Laser Receiver - Nedo PRIMUS2 H2N Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN Operating instructions
42

12 Laser receiver COMMANDER 2 H2N/H2N+

12.1 Displays and controls of the laser receiver

Display lights up: limited remaining life
1
(battery approx. 5h / rechargeable approx. 0,5h)
Lights up if the laser line is within the sensor
2
window but below the zero line. In addition, the
red LED next to the reception field lights up and
Lights up if the laser line is located at the level of
3
the zero line. In addition, the green LED next to
the reception field lights up and a
Lights up if the laser line is within the sensor
4
window but above the zero line. In addition, the
yellow LED next to the reception field lights up
and also a fast melody sounds.
LCD display DETECTOR FIELD RESOLUTION
5
Displays the currently set resolution:
4=±4mm / 2=±2mm / 1=±1mm / 0=±0.5mm
LCD display ACOUSTIC SIGNAL
Display = acoustic signal loud/
6
Display = acoustic signal quiet/
No Display = acoustic signal off
Button DETECTOR FIELD RESOLUTION
7
Switches the resolution between
±4mm / ±2mm / ±1mm / ±0.5mm.
8
Switches the acoustic signal between
9
Switches the receiver on and off.
LCD display BATTERY
LCD display LOWER
also a slow melody sounds.
LCD display TARGET
continuous melody sounds.
LCD Display HIGHER
Button ACOUSTIC SIGNAL
loud/quiet/off.
Button ON/OFF
1
2
3
4
5
6
(2)
(3)
(4)
7
8
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Primus2 h2n+Commander2 h2n

Tabla de contenido