Installation And Operation; Delivery Contents; Mounting Options; Connection And Operation - KLEIN+HUMMEL IS SUB 215 Manual Del Operador

All manuals and user guides at all-guides.com
Klein + Hummel

■ Installation and Operation

■ Delivery Contents

• 1 Installed Subwoofer IS SUB 215
• 1 Manual IS SUB 215
• 1 Warranty card

■ Mounting Options

Hardware on the side of the case allows the subwoofer to form the base for speaker stands with a 35mm pipe
diameter.

■ Connection and Operation

The two drivers of the IS SUB 215 are wired in parallel to pins 2+/2- of the Neutrik NL4 connectors., giving a net
load impedance of 4 Ohms.
Pins 1+/1- on the Neutrik NL4 connector are wired as a simple pass through connection so that a single multicore
cable can be used to drive both the subwoofer and the top full range loudspeakers.
Connection Plate IS SUB 215 Connector Wiring
Operating Manual IS SUB 215 English 3