Settings Table - Greenlee CM-1200 Manual De Instrucciones

All manuals and user guides at all-guides.com
Operation
Electric shock hazard:
Contact with live circuits can result in severe injury or death.
1. Set the selector according to the settings table.

Settings Table

To measure set the
this value ... selector to
this symbol ...
Continuity*
Current (AC) A
Current (DC) A
Frequency**
Resistance
Voltage (AC) V
Voltage (DC) V
* Tone indicates a circuit resistance is less than 100Ω.
** Frequency can also be measured with the jaw.
2. See Typical Measurements for illustrations of typical uses.
3. Test the unit on a known functioning circuit or component.
• If the unit does not function as expected on a known functioning circuit, replace the
battery.
• If the unit still does not function as expected, send the unit to Greenlee for repair.
connect the
red lead
to ...
KΩ VΩ
. N/A
N/A
Hz VΩ
KΩ VΩ
VΩ
VΩ
CM-1200
and the
black lead
to ...
COM
N/A
N/A
COM
COM
COM
COM
9