INSTRUCTIONS
How to use
1
4
7
1. Start by taking the
minutes.
2. Wash the cartridge under running water 2-3 times. Do not be alarmed by the black-col-
ored water flowing out of the filter, this is perfectly normal.
3. Put the cartridge into place in the
4. Put the
back.
Lid
5. Fill the inner cup with cold water and let it pass through the filter. Once it has been filtered,
discard the water. Repeat this entire step a second time.
6. Long-press the
Start
seconds to reset the counter. The display will flash when the reset is complete.
7. Fill the inner cup a third time for the water filter jug to be ready for use.
NOTE: Repeat the cleaning of the cartridge and the jug multiple times, as described in steps
1-7, every time the filter cartridge is replaced with a new one.
For optimum performance, the filter cartridge should be replaced after about
150 liters of water, which corresponds to approximately 60 days of normal use. To
keep track of when the filter is in need of replacement, the jug is equipped with
2
5
Water Filter Cartridge
Inner Cup
button on the
Cartridge Exchange Indicator
3
6
and soaking it in water for 12
and make sure it is firmly secured.
EN
for 8
6