Safety lock
The appliance is equipped with a safety lock for your
safety. Any heating process is terminated after 4 hours
if there is no operation in this time. Blinking hyphens
appear on the display.
Turn the temperature control knob to 0, then you can
start up the appliance again like normal.
Draining cooking liquid
9
WARNING
Risk of scalding
When draining water without a fixed drain
connection: First let appliance cool down. To
collect the water, place an appropriate
container with sufficient capacity under the
appliance.
Note: If you do not have a fixed drain connection, you
must install the AG 060 000 drain installation set and
put a temperature-resistant vessel of appropriate size
(at least 10 l or about 20 pints) under the drain valve.
Opening the drain valve
1
Turn the temperature control knob to the left to
the ¤ position.
2
Turn the short-term timer control knob to the left
to the ¤ position and hold it in this position.
A signal sounds. ¤ flashes in the display after a few
seconds. The drain valve is opened. ¤ lights up
permanently in the display when the drain valve is
open.
12
Closing the drain valve
1
Turn the temperature control knob to the right to
the 0 position.
A signal sounds. ¤ flashes in the display after a
2
few seconds. The drain valve is closed. ¤ goes
off as soon as the drain valve is closed.
Notes
¤ flashes in the display if the drain valve is not
‒
completely open or closed.
‒
Always leave the residue strainer on the drain
opening. This ensures that food leftovers will not
block the drain valve.