mabe EM5130BBE Instructivo Manual página 11

Estufa a gas
Ocultar thumbs Ver también para EM5130BBE:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Specifications Jamaica models 20” and 24 “
Burner
Economic, 20” models
Standard 3”, 20” models
Standard 3”, 24” models
Standard 4”, 24” models
Oven, 20” models
Oven, 24” models
Oven Volumetric Capacity on 20” models
Oven Volumetric Capacity on 24” models
installation
backguard
There are 2 different backguards that are installed in a different way depending on the
model of your range. "Option 1" has 4 perforations in the rear bottom flange and "Op-
tion 2" has 4 or 2 perforations (depending also on the model) on the front face.
Option 1
1. Place the backguard over the rear por-
tion of the cooktop, and make sure per-
forations on both parts match.
2. Fix the backguard using two screws and
2 bolts with nuts. A screw and a bolt
with nut on each side.
depth
width
1. Shut off main gas supply valve and control knobs.
2. Perform gas hookup. Use any sealer for gas connections.
3. Finally, plug in my electric cord (on models that apply).
note: Do not use extension cords other than size 12 and do not plug any other appliance
to the same outlet in order to avoid voltage variations.
caution When installing or moving this
appliance do not lean on the door's
handle.
Minimum distance from
cooktop to venting hood:
80 cm approximately.
Spud Gap
L.P. Gas
Natural Gas
68 (0,031”)
57 (0,043”)
66 (0,033”)
56 (0,046”)
71 (0,026”)
63 (0,037”)
68 (0,031”)
57 (0,043”)
68 (0,031”)
55 (0,052”)
63 (0,037”)
55 (0,052”)
65 246 cm³ 2,28’
82 203 cm³ 2,86’
Option 2
1. Place the backguard behind the cook-
top, making sure the range flue gets
into the "window" on the bottom of
the backguard. Note: Cooktops and
cooktops with cabinet are not equipped
with a flue.
2. Fix the backguard using two screws.
Screws must be driven through the bot-
tom perforations of the backguard and
into the cooktop.
Window
4 Perforations
(or 2 depending
on model)
height
Range front
Cooktop
Backguard
note: Don't forget to connect a pressure
regulator and a shutoff valve in the gen-
eral gas installation in order to maintain a
proper pressure.
Regulator
Capacity
kJ/h
7 385
8 440
5 275
7 385
10 022,5
11 605
Rear view
of backguard
Bottom
perforation
Screw
Flue
Valve
11

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido