EFBE-SCHOTT SC UV 900 Manual De Instrucciones página 10

11. Unscrew the screws in the middle of the top and bottom plates which fixate the
lamps by hand and remove them. Take out the lamps by lifting them out of the socket,
tilting it slightly and pulling it out of the upper metal holder.
12. Unwrap new lamps*, insert them slightly tilted in the metal holder and push it
straight down until it clicks into the socket, indicating that it is locked in. Place the
metal holders back on top & bottom and fasten them by screwing the screws back in.
SC UV 900 10