Optional Accessories - Makita JR002G Manual De Instrucciones

NOTE: Always pull the release lever fully to the end.
If not, the blade clamp sleeve does not come to the
released position and the recipro saw blade cannot
be inserted.
Insert the recipro saw blade into the slot of the blade
clamp sleeve as far as it will go. The blade clamp sleeve
will catch the recipro saw blade with a click. Make sure
that the recipro saw blade cannot be extracted even
though you try to pull it out.
Fig.12: 1. Recipro saw blade 2. B l a d e c l a m p s l e e v e
CAUTION:
If you do not insert the recipro saw
blade deep enough, the recipro saw blade may be
ejected unexpectedly during operation. T h i s c a n
be extremely dangerous.
To remove the recipro saw blade, pull the release lever
in the direction of the arrow fully.
Fig.13: 1. Recipro saw blade 2. R e l e a s e l e v e r
NOTICE:
Never operate the release lever when
operating the switch trigger. Doing so may cause
malfunction.
OPERATION
CAUTION:
Always press the shoe firmly
against the workpiece during operation. I f t h e
shoe is removed or held away from the workpiece
during operation, strong vibration and/or twisting will
be produced, causing the blade to snap dangerously.
CAUTION:
Always wear gloves to protect
your hands from hot flying chips when cutting
metal.
CAUTION:
Be sure to always wear suitable
eye protection which conforms with current
national standards.
CAUTION:
Always use a suitable coolant
(cutting oil) when cutting metal. F a i l u r e t o d o s o w i l l
cause premature blade wear.
CAUTION:
Do not quirk the blade during
cutting.
CAUTION:
Do not operate the tool with the
hook opened.
Press the shoe firmly against the workpiece. Do not
allow the tool to bounce. Bring the recipro saw blade
i n t o l i g h t c o n t a c t w i t h t h e w o r k p i e c e . F i r s t , m a k e a p i l o t
g r o o v e u s i n g a s l o w e r s p e e d . T h e n u s e a f a s t e r s p e e d
t o c o n t i n u e c u t t i n g .
Fig.14
NOTICE:
Do not cut the workpiece with the shoe
away from the workpiece or without the shoe.
Doing so increases the reaction force which may
break the recipro saw blade.
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
a c c e s s o r i e s o r a t t a c h m e n t s m i g h t p r e s e n t a r i s k o f
injury to persons. Only use accessory or attachment
f o r i t s s t a t e d p u r p o s e .
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
C e n t e r .
Recipro saw blades
Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
di er from country to country.
9 ENGLISH