TRAPP TR 200 Manual De Instrucciones página 36

Attention!
Frequently check if all screws are well
tightened. Always keep the blades adjusted to
assure the good performance of the shredder.
6
5
2
36
Feeding Funnel Assembly
1
4
3
Handling TR 200
Attention!
Whenever cleaning or servicing, make sure
the equipment is off and the blades are still as
they continue to move for some seconds.
Fit the feeding funnel (1) onto the body (2),
 
and pass the locking pin (3) through the holes
of the feeding funnel (1) and body (2).
Fasten the locking pin (3) with the cotter
 
pin (4).
Then lock the feeding funnel (1) using the
 
washer (5) and handle (6).
Through the handle, tilt the chopper to the
 
proper height for the user.
Move the shredder to the point required and
 
start the work.
www.trapp.com.br