Setup & Installation - TCL Q Serie Manual Del Usuario

Setup & Installation
Window Requirements
1. This air conditioner is designed to be installed in a standard single-hung or double-hung
window with a window width between 25" and 36" (645mm - 915mm).
2. The air conditioner can be installed without the side panels to fit in a narrow window opening.
See the window dimensions. If the air conditioner is installed on a window width of 25.39"-
28.35" (645-720mm), it must be installed to the right, and the right bracket must be touching
the air conditioner (not extended); otherwise, the air conditioner will not operate normally.
3.
The lower sash (the lower part of the window that moves up and down) must allow for 14.5"
of vertical clearance when open.
4. All supporting parts must be secured to firm wood, masonry, or metal.
5.
The electrical outlet must be within reach of the power cord. (Electrical outlets only, no power
strips or other outlets allowed.)
Note: Store the air conditioner in its product box while not in use.
Suggested Tools for Installation (Not Included)
Phillips Scissors
Screwdriver or Knife
CAUTION
Heavy object. Team handling is required during the installation process.
Stool Offset
Sill
Interior
Wall
Pencil
25-36 inch
645-915 mm
Exterior 14.5 inch
Wall 368 mm
Level
8
Tape Measurer
or Ruler 1/8" Drill Bit
Drill and