YESOUL V1 Manual De Producto página 9

Installation Guide
STEP 6: Pedal installation
1.Take out the pedal assembly ⑬.
2.Pay attention to distinguish left pedal and right pedal.
3.Lock the left pedal assembly ⑬ into the left crank, and tighten with the box-ended wrench (D)
along the direction indicated by the arrow.
4.Lock the right pedal assembly ⑬ into the right crank, and tighten with the box-ended wrench (D)
along the direction indicated by the arrow.
Screw the pedal into the crank manually first, and
then tighten the left/right pedal assembly ⑬ with the
box-ended wrench (D). (Note: The tightening
Wrench (D)
directions for both the left pedal and the right pedal
are towards the head direction.)
R pedal assembly ⑬
Safety tips:
Reverse riding is not recommended, as it is likely to loosen pedals. After reverse riding, check
whether the pedals are locked, in order to avoid safety issues arising from loose pedals.
L pedal assembly ⑬
8