Bayrol Automatic SALT Instrucciones De Uso página 40

Indication for disposal
16
Disposal of waste electrical and electronic domestic systems in the European Union
All the product marked with this symbol indicate that the product shall not be mixed or disposed with your
household waste at their end of use. lt is responsibility of the user to eliminate this kind of wastes depositing
them in a recycling point adapted for the selective disposal of electrical and electronic wastes. The suitable
recycling and treatment of these wastes contributes in essential way to the preservation of the Environment and
the health of the users. For further information regarding the points of collection of this type of wastes, please
contact to the dealer where you acquired the product or to your municipal authority.
Annex
17
Calculation of pool volumes
RECTANGULAR SHAPED POOL
Length (m) x width (m) x depth* (m)
DOUBLE ROUND SHAPED POOL
Longest length (m) x widest width (m) x Depth* (m) x 0.85
= Pool volume (m )
3
Calculation of salt needed
The amount of salt to be added when filling the pool with salt free water is calculated according to the following formula:
Desired salt content (g/l) x pool volume (m
The amount of salt to be added to water that has already been salted is calculated according to the following formula:
[ Desired salt content (g/l) – Existing salt content (g/l) ] x Pool volume (m
40
= Pool volume (m )
3
) = amount of salt added (kg)
3
OVAL SHAPED POOL
Longest length (m) x widest width (m) x depth* (m)
x 0.89 = Pool volume (m )
3
ROUND SHAPED POOL
Diameter (m) x Diameter (m) x depth* (m) x 0.79
= Pool volume (m )
3
*Depth = average water depth
) = Quantity of salt added (kg)
3