Mixer Output Section - US Blaster USB 7015 Manual De Instrucciones

All manuals and user guides at all-guides.com
USB 7015
Console mixer
INPUT CHANNEL SECTION
20. EFX SEND
When you are using STEREO board, you can adjust the sound
volume of all kinds of effects.
21. EFX RET
Controls the level of EFX Input signals.
22.EFFECT SEND
This is used for adjusting the volume of echo sound when sen-
ding echo sound to the SEND jack in the EFFECTS panel.
23. REPEAT
This is used for adjusting frequency of echo repeat.
24. DISPLAY
Press the up and downbuttons to obtainthe perfect reverberati-
ve effect. There are 16 different settings.

MIXER OUTPUT SECTION

25. STEREO OUTPUT JACK (LEFT] RIGHT)
In this output, the final confirmed sound can be send to the
main amplifier through XLR & 6.3 mm Jack.
26. STEREO AUX RETURNS & SENDS
This can be used to connect all kinds of external effects.
27. TAPE INPUT JACK
This jack is to be connected with a tape recorder when playing
back.
28. RECORD PIN JACK
Connect this jack with tape recorder when recording the mixed
output.
29. PHONES JACK
This is used for monitoring the master signal and for individual
monitoring of each channel with PFL,L/R&GI-2.
© US Blaster Europe BV