Bimar VPM411 Folleto De Instrucciones página 14

7) Turn the appliance over to the ground on a
cloth or other soft surface (taking care not
to damage or deform the heating unit,
columns and base, so as not to
compromise its proper functioning.); place
the cord inside its slide on the bottom of
the base and secure it by means of the
fixing plate and the two screws supplied in
its seat.
Reposition the appliance in an upright position
The fan can be installed at two heights depending on whether or not the middle tube is used.
If the smaller size (without Middle column)
is needed please avoid the point 2 of
assembly and proceed to connect the
upper tube to the lower tube by screwing
them together.
USE
Before using, check that the equipment is in good state, that the electric cord is not damaged.
If the power cord is damaged, it must be replaced by the manufacturer of its technical service,
or by a similarly qualified professional, to prevent any and all risk.
Insert the plug into the electric socket.
Fan: select the speed desired using the
dedicated keys (7):
1 - Minimum speed 2 - Medium speed
3 - Maximum speed
To activate oscillation (right-left) turn the
knob clockwise
corresponding to the desired power
setting:
Minimum speed
=
If the fan is working the light ring will be on; if the fan is off, the light ring will be off.
to the position
Medium speed
. =
Maximum speed
. =