PROZIS ERLY Manual Del Usuario página 8

Note: To set current time, both of the alarm clocks must be deselected.
SETTING ALARM CLOCK TIME
Press to choose between Alarm clock 1 or 2 and then repeat the Setting the time process.
SET
LED DISPLAY AREA (SEE PAGE 2, FIGURE B)
1. LED digital display: clock
2. Steady BT light - BT connections established / BT light blinking - pairing mode
3. Steady TF light - TF card playback mode selected
4. Steady AUX light - AUX playback mode selected
5. Alarm 1 - steady light - alarm clock active
6. Alarm 2 - steady light - alarm clock active
FUNCTIONAL PORTS (SEE PAGE 2, FIGURE C)
1. TF card slot
2. Charging port
3. Reset & charging indicator
4. 3.5 AUX audio line-in port
BT PAIRING
1. Switch on your alarm clock by long pressing the On/Off button for about 4 seconds, BT
mode will be on by default. The alarm clock will enter pairing mode automatically and the
BT light will flash at the front of your alarm clock.
2. Please enable your mobile phone's BT and search for PROZIS Erly, pair and connect. When
the connection has been successful you will hear a sound from your alarm clock.
Note: Once you have connected your cell phone with the alarm clock it's only possible to
connect another phone after disconnecting the first one.
CHARGING
Connect your alarm clock via USB cable to any power source (USB charger, Powerbank,
Laptop...): see page 2, figure C
• Red light while charging, light off when fully charged.
EN
8