Kohler Antique K-205 Guia De Instalacion página 7

6. Install the Towel Bar
Position a post on one of the wall plates with the accessory
mounting hole horizontal.
Turn the nut counterclockwise to thread into the post while keeping
the post properly aligned.
If the post is slightly misaligned, turn the post until the proper
alignment is achieved.
Repeat with the second post.
Position the sleeve between the accessory mounting holes in the
posts.
Slide the towel bar through the outside edge of one of the mounting
holes.
Secure the towel bar in place by tightening a knob onto the end of
the sleeve.
Go to the "Finish the Installation" section.
Kohler Co. 7 1020817-2-A