Kohler Antique K-205 Guia De Instalacion página 8

7. Install the Mirror
Position a post so the accessory mounting hole is horizontal.
Turn the nut counterclockwise and thread it into the post while
keeping the post properly aligned.
Install a rubber washer onto the stem.
Slide a stem through the mounting hole in the post.
While holding the mirror assembly in place, install a plastic washer,
then a rubber washer onto the stem.
Tighten the mirror in place by threading a knob onto the exposed
end of the stem and tightening.
Repeat with the second post.
1020817-2-A 8 Kohler Co.