JMA EvoXpert Manual De Instrucciones página 29

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
• First the Mobile (setting it to Hotspot mode).
• Then the EvoXpert.
Any browser installed on the mobile can now be used to type in the
hostname of the EvoXpert (http:// EVOXPERT-C21C40) or the IP address
assigned to the EvoXpert and an Internet connection will be established via
the 3G/4G service on the mobile.
4.3.2
If, for whatever reason, you forget to establish a mobile Hotspot
connection while inside the store, you can follow the Wi-Fi configuration
steps described in Sections 4.2.2.1 and 4.2.2.2, with a few differences:
• Because your mobile is in Hotspot Mode (producing a Wi-Fi
network), this handset cannot be used to connect to the Wi-Fi being
produced by EvoXpert.
Therefore, and ONLY to establish this initial connection via the already
known IP address 192.168.8.1, you will need a tablet, mobile or other device
with Wi-Fi to connect to the EvoXpert and navigate to the Connections page
to search for the Wi-Fi from the mobile being used as a hotspot.
• Because EvoXpert was already configured to connect to your
business Wi-Fi, you will need to hold the Reset button for 1 second and
return the machine to its default settings in AP Mode (Access Point) so the
"EVOXPERT" Wi-Fi network is activated.
IMPORTANT: If you do not hold the button down (producing a short press),
you will perform a standard reset.
Therefore, you should perform this first part of the connection process with
the mobile you are NOT using in HotSpot Mode in order, as explained above,
to connect to the EVOXPERT Wi-Fi network generated by your terminal and
open the default web page at 192.168.8.1 from any web browser on that
mobile:
Or access that web page by opening JMA KEY CLONING PRO:
Where the terminal is selected and the website opened in a single step by directly
accessing the Connections page, where the HotSpot Wi-Fi network from the mobile
is entered.
After waiting for the EvoXpert to restart, you can check that the EvoXpert is
actually connected to that HotSpot Wi-Fi network in shared connections (connected
devices).
29

Publicidad

Tabla de contenido
loading

Tabla de contenido