JMA EvoXpert Manual De Instrucciones página 33

After downloading and installing the TeamViewer QuickSupport app from
Play Store, the user ID is the only information you need to provide to the
experts from the JMA technical assistance service so they can quickly and
easily connect and solve any problems with the client.
The user ID is random and only provides temporary access to the handset.
This access is interrupted either when JMA closes the session or when the
client closes the TeamViewer QuickSupport app.
If you need to reconnect, the client will need to open the app again and send
the new number generated by the app to the experts at JMA given that the
previous number can no longer be used.
7. TRANSPONDERS - CLONING ID48 KEYS
The copy process begins automatically after inserting any key with a
transponder into the device's antenna.
The key icon will change from grey (NO KEY) to blue (KEY IN).
Your EvoXpert machine will identify the key and also tell you whether the
copy is made instantly or via access to the calculation servers located at
JMA.
In this example, for an original Audi A1 (2013) key, we need to access the
Megamos codes server. This will become apparent when the Pop-up Menu
below appears.
You can fill this in completely or partially but you must enter information in
the required fields marked with * (Brand / Model).
This menu is displayed whenever the client has purchased & registered their
EvoXpert machine correctly.
This registration process not only allows access to the Megamos 48 server
(current key) but also allows the key technologies listed below to access
their respective servers at JMA.
• Texas DST40.
• Texas DST80.
• Philips HT2 (46).
• TOYOTA-AES (pending connection to the EvoXpert machine).
• HONDA-G (pending connection to the EvoXpert machine).
Whenever you are using the guided copy process, you will then be told
which type of blank JMA chip you need to insert, in this case a blank TPX8/
TPX8+ chip:
The copy process continues by changing the chip settings and setting it to
SNIFF Mode so you can then collect certain data from the vehicle ignition
33