VONROC S4 LM505DC Traducción Del Manual Original página 14

EN
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keep-
ing your hands warm, and organizing your work
patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2-8.
1. Upper handle
2. On/off switch
3. Safety button
4. Power cable
5. Machine
6. Cable holder
7. Carrying handle
8. Wheel
9. Wheel cover
10. Grass box bag
11. Grass box lid
12. Grass box cover
13. Grass level indicator
14. Lower handle
15A. Upper handle adjustment knob
15B. Bolt for upper handle
15C. Washer for upper handle
16. Grass box carrying handle
17. Height adjustment lever
18. Grass outlet
19. Battery compartment cover
20. Battery bay
21. Safety key (isolator switch)
22. Battery unlock button
23. Battery
24. Battery LED indicators button
25. Battery LED indicators
26. Charger
27. Charger LED indicators
28. Blade
29. Blade bolt
30. Charger
31. Green LED indicators
32. Amber LED indicators
33. Red LED indicators
34A. Lower handle adjustment knob
34B. Bolt for lower handle
34C. Washer for lower handle
14
3. ASSEMBLY
Before any work on the power tool, remove
the battery.
The battery must be charged before first use.
Warning: Use only batteries which are
charged to the same level. Never combine full
and half-full batteries. Always charge the two
batteries simultaneously. The equip-
ment's operating time depends on the battery
with the lower charge level. The two batteries
must always be fully charged before use.
Inserting the battery into the machine (Fig. A, J)
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine. Close the battery cover
before use.
This machine is designed and developed
specifically to be used with CD803AA
Warning: for use with
CD803AA 4.0Ah only!
4.0Ah only. It is not allowed to use this
machine with CD801AA 2.0Ah battery or
any other battery type, as it may
permanently damage the battery and/or
the machine. Warranty is voided for both
battery as the machine, when the wrong
battery type is used.
1. Open the battery compartment cover (19).
2. Insert the battery (23) into the battery bay (20)
as shown in Fig. J.
3. Push the battery further forward until it clicks
into place.
4. Repeat for the other battery (23).
5. Close the battery compartment cover (19).
Removing the battery from the machine (Fig. A, J)
1. Open the battery compartment cover (19).
2. Pull the battery (23) out of the battery bay (20)
as shown in Fig. J.
3. Repeat for the other battery (23).
Checking the battery charging status (Fig. K)
• To check the battery charge status, push the
button (24) on battery shortly.
• The battery has 3 lights indicating the charge
level, the more lights that burn, the more charge
the battery has left.
WWW.VONROC.COM