Jimmy HW9 Instrucciones De Uso página 9

Self cleaning and brushroll drying
Before self-cleaning, Drain the dirty water tank, place
the machine on the charging base, insert the charger
into the socket, keep at least 1/2 of the water in the
clean water tan.
Press the mode button for 5 seconds, the machine will
enter self-cleaning mode, the self-cleaning indicator
on the LED display will blink. During self-cleaning
process, to end self-cleaning mode in advance , press
on/off button and machine will stop self cleaning and
return to charging mode. (Fig 12)
After self-cleaning is completed, the machine enters
brushroll drying mode automatically, the brushroll
drying indicator on the LED display will light up and
device also starts charging ; during the brushroll drying
process, to end the brushroll drying in advance , press
on/off button and machine will stop brushroll drying
and remain in charging mode.
Note:
1.Drain the dirty water tank before and after self-
cleaning to avoid odor.
2. When the power is lower than 10%, the machine
cannot enter the self cleaning mode.
Chapter 3 Cleaning and
Maintenance
Clean dirty water tank
1.When dirty water tank is full, the dirty water tank full
indicator on LED screen will blink.The machine will
stop working immediately and has voice reminding.
2.After stopping work, take out dirty water tank and
remove upper cover from dirty water tank, pour out the garbage from filter frame an and dirty water from dirty
water tank, wash the dirty water tank and the filter frame with clean water.
3.If there is stubborn stains on the inside of the dirty water tank, clean them directly with cleaning brush.
4.Dry the dirty water tank parts after washing, then put them back into the dirty water tank, and then assemble
the dirty water tank into the machine until a "click" sound is heard. (Fig 13)
Brushroll cleaning
Take out the brushroll window and pull out the brushroll. Use dry cloth to wipe brushroll housing and remove
the hair tangled around brushroll by the mini brush. Wash the brushroll window and brushroll in clean water.
After cleaning, assemble brushroll and brushroll window back to machine. (Fig 14) The brushroll can also be
put into the accessories holder for drying.(Fig 15)
Note:
1.Do not wash the whole floorhead in water.Do not wash the floorhead with water or immerse it in water after
pulling out the brushroll, so as not to damage the components and affect the use.
2.If the cleaner will not be used soon after cleaning,completely dry the dirty water tank, dirty water tank cover,
filter, filter frame, brushroll, brushroll window, machine and then assemble the machine for storage, in order to
prevent the bacteria from breeding in the humid environment and producing odor.
Keep pressing
mode button
Keep 1/2 water inside
clean water tank
12
Filter assembly
Upper cover
assembly
Filter frame
Dirty water tank
13
Brushroll cleaning
14
Take out the brushroll
window
Brushroll storage
15
Clean dirty Clean filter
water tank frame
pull out the brushroll
Cleaning brush
storage
HEPA/Adaptor
storage
7