Jabra GN 7100 Manual Del Usuario página 3

English
Connecting the telephone
• Mount the headset stand in the holder on the right side of the telephone.
• Connect the telephone line cord to the telephone. Insert your headset in the QD-connector. GN 7100 can be used with
all GN Netcom headsets.
• Open the battery compartment underneath the telephone. Insert the battery and close the battery compartment.
• You can install the telephone on the wall using the enclosed wall fitting. Mount the fitting on the wall and attach the
telephone. Turn the headset stand 90
Setting the clock
The telephone has a built-in real time clock. It shows the actual time and the time for incoming calls in the memory.
• Press the On/Off button.
• Press the Set Mode button to enter set mode.
The display shows a blinking hour code.
• Press the HOUR button to adjust the hour. Press the button successively to set the hours.
• Press the MIN button to adjust the minutes. Press the button successively to set the minutes.
• Press the Set Mode button to leave set mode.
• Press the On/Off button to turn of the telephone.
Setting the time mode
• Press the On/Off button to connect the telephone. Press the Set Mode button to display the clock. Then press the Time
Mode button to toggle the RTC function between 12-hour clock and 24-hour clock mode.
Displaying the clock
• Press the HOUR button to display the clock while using the telephone. To return to display call duration, press the HOUR
button again.
Adjusting the call signal
You can adjust the volume and the sound of the call signal on the left side of the telephone.
• The Transmission volume control has three positions: Off, Low and High.
• The Signal Sound control can be set in three different modes: Low, Medium, High.
Placing a call
• Put on your headset.
• Press the On/Off button and wait for a dial tone. The online indicator on the On/Off button lights up.
• Enter the telephone number. The digits are shown in the display.
Note: The telephone can handle up to 32 digits but the display can only show the last ten digits entered.
• Adjust the volume in your headset, using the Receive Volume control on the right side of the telephone.
• Press the On/Off button to end the call.
Answering a call
• Put on your headset.
• Press the On/Off button to answer the call.
• Press the On/Off button to end the call.
Functions on the telephone
Repeating the last number dialled
If you do not get an answer or the line is busy, the redial button can be used to save and redial the number.
All manuals and user guides at all-guides.com
O towards the top of the telephone.