Technical Data - Aqua Medic mV Computer Manual De Instrucciones

8. Set up for controlling the ORP with an Ozonizer
The redox probe is placed in the aquarium at a dark and well-circulated place. The ozonizer is
connected to the mV computer (connection plug, 4) and the set point is adjusted as described,
e. g. at 400 mV. The air is produced by a membrane air pump, pressed through the ozonizer and
directed into the protein skimmer. Here, the small bubbles produce the foam and remove the
organics with the aid of ozone. If the desired ORP value in the aquarium is reached, the ozonizer is
switched off. Take care that all ozone is used in the protein skimmer and no residual ozone escapes
into the air or water. It can be detected by its strong smell.
9. Electrode
The Aqua Medic electrode is specifically designed to determine the redox-potential in fluid based
solubles. It can be used in the chemical industry, medical areas and in research labaratories.

9.1. Technical Data

Measurement range:
Sample temperature:
Connection:
Material:
9.2. Measurement/Maintenance
- During the measurement, the platinum tip must be continuously submerged in the solution.
- A new probe or one which has been dry for a longer period must lay in water for at least 24
hours.
10. Failures
- The unit indicates false values --> clean the probe.
- The redox-potential probes have a limited lifespan (1 - 3 years).
11. Warranty
Should any defect in material or workmanship be found within 12 months of the date of purchase
AB Aqua Medic GmbH undertakes to repair or, at our option, replace the defective part free of
charge – always provided the product has been installed correctly, is used for the purpose that was
intended by us, is used in accordance with the operating instructions and is returned to us carriage
paid. The warranty term is not applicable on the all consumable products.
Proof of Purchase is required by presentation of an original invoice or receipt indicating the dealer's
name, the model number and date of purchase, or a Guarantee Card if appropriate. This warranty
may not apply if any model or production number has been altered, deleted or removed,
unauthorised persons or organisations have executed repairs, modifications or alterations, or
damage is caused by accident, misuse or neglect.
We regret we are unable to accept any liability for any consequential loss.
Please note that the product is not defective under the terms of this warranty where the product,
or any of its component parts, was not originally designed and / or manufactured for the market in
which it is used.
These statements do not affect your statutory rights as a customer.
If your AB Aqua Medic GmbH product does not appear to be working correctly or appears to be
defective please contact your dealer in the first instance. Before calling your dealer please ensure
you have read and understood the operating instructions. If you have any questions your dealer
cannot answer please contact us.
Our policy is one of continual technical improvement and we reserve the right to modify and adjust
the specification of our products without prior notification
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
All manuals and user guides at all-guides.com
1,000 - + 1,000 mV
5 - 60° C, short-term
BNC-plug
Plastic shaft, Polysulfone, platinum tip
- Technical changes reserved – 11/2014
10