General Power Tool Safety Warnings; Work Area Safety; Electrical Safety; Personal Safety - Dexter UP20 Manual De Instrucciones

FR

GENERAL POWER TOOL SAFETY WARNINGS

WARNING: Read all safety warnings, instructions, illustrations and speci cations provided with this power tool.
ES
Failure to follow the warnings and instructions may result in electric shock, re and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE. The term «power tool» in the warnings refers to
your mains-operated (corded) power tool or battery-operated (cordless) power tool.
PT

1. WORK AREA SAFETY

IT
A.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
B. Do not operate power tools in explosive atmospheres, such as in the presence of ammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or fumes.
EL
C.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
PL

2. ELECTRICAL SAFETY

A. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with
UA
earthed (grounded) power tools. Unmodi ed plugs and matching outlets will reduce risk of electric shock.
B. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or grounded.
C.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
RO
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away
D.
from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
E.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for
EN
outdoor use reduces the risk of electric shock.
F.
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.

3. PERSONAL SAFETY

A.
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power
tool while you are tired or under the in uence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid
B.
safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
C. Prevent unintentional starting. Ensure the switch is in the o -position before connecting to power source
and/or battery pack, picking up or carrying the tool. Carrying power tools with your nger on the switch or energising
power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating
D.
part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in
E.
unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving
F.
parts. Loose clothes, jewellery or long hair can be caught in moving parts.
G.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connec-
ted and properly used. Use of dust collection can reduce dust-related hazards.
Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety
H.
principes. A careless action can cause severe injury within a fraction of a second.
19