Using The Snooze Button; Displaying Temperature - Auriol HG02132A Instrucciones De Utilización Y De Seguridad

Note: The alarm signal sounds every
day at the set time.
Press the SET / RESET button three times
to deactivate Alarm 1. Press the SET /
RESET button twice to deactivate Alarm
2. Press the SET / RESET button once to
deactivate Alarm 1 and Alarm 2.

Using the snooze button

Z
Press the Z
/ REGISTER button while
21
the alarm signal is sounding to activate
the snooze function.
The alarm signal is silenced and the
Z
and Z
displays or flash.
The alarm signal sounds again after
approx. 5 minutes.
Press the SELECT button to deactivate
23
the snooze function.

Displaying temperature

The LC display shows the indoor temperature
and the outdoor temperature .
13 9
Press and hold down the SELECT button
for approx. 3 seconds. The °C dis-
23
play flashes.
Press the SET / RESET button to switch
24
between the °C (Celsius) and °F (Fahr-
enheit) temperature scales.
Press the SELECT button to confirm your
settings.
GB/MT 93