Best D49M30SB Manual De Instrucciones página 10

OPERATION
2-Level Task Light
4-Speed Fan Speed Control
10-Minute Delay Off
30-Hour Filter Clean Reminder
Down / Retract Chimney
All manuals and user guides at all-guides.com
Models D49M30SB • D49M36SB • D49M48SB
Up Button
2-Level Task Light
Press once for LOW setting. Top of icon will illuminate.
Press 2x for HIGH setting. Top and bottom of icon will illuminate.
Press 3x to turn task light OFF.
4-Speed Fan Speed Control
Press once for LOW setting. Top-right quadrant of icon will illuminate.
Press 2x for MEDIUM LOW setting. Top-right and bottom-right
quadrants of icon will illuminate.
Press 3x for MEDIUM HIGH setting. Top-right, bottom-right, and
bottom-left quadrants of icon will illuminate.
Press 4x for HIGH setting. All quadrants of icon will illuminate.
Press 5x to turn fan OFF.
10-Minute Delay Off
When fan is ON at any speed setting, press delay-off icon to start
10-minute timer. Fan and icon will shut off after 10 minutes.
To reset or de-activate delay-off, press icon again.
30-Hour Filter Clean Reminder
After 30 hours of blower "ON" time, filter clean icon will blink
continuously.
To reset, touch and hold icon for 2 or more seconds. Indicator
will turn off.
Down / Retract Chimney
To retract chimney, touch down button. Any feature that is active
will shut off.
Up Button
Touch up button on right trim to raise chimney. All functions will
return to their previous settings.
Heat Sentry
When the operating temperature is too high, the fan speed will
increase to its highest setting to protect sensitive components.
The fan icon will blink and cannot be overridden until the tem-
perature reaches an acceptable level. The fan speed will return
to the previous setting and the icon will stop blinking.
Page 10