Akai ACP-64 Manual Del Usuario página 17

- Converted the projection time or temperature, keep depressed over 2
seconds to enter PROJECTION TIME 180° FLIP/TIME-TEMPERATURE
button (6).
Note: The time must be projected on the wall or on the ceiling of a darkened
room. The distance range for the clock projection is between 0.90m ~ 2.70m.
7. RESET
If the system does not respond or exhibits erratic or intermittent operation, you
may have experienced an electrostatic discharge (ESD) or a power surge that
triggered the internal microcontroller to shut down automatically. If this occurs,
simply disconnect the ac power cord and remove the system backup battery,
wait at least 3 minutes and then setup the unit again by following the manual.
Model Reference
Power supply
Power consomption
Standby mode consomption
Battery back up
Radio Frequency coverage
Audio output power
Product weight
Product Dimensions
Indoor temperature range
Due to continual revision and improvement on our products design,
specifications are subject to change without further notice.
All manuals and user guides at all-guides.com
SPECIFICATIONS
• ACP-64
• AC 230 V ~ 50 Hz
• 5 W
• <1 W
• 3V (CR2032 Flat Lithium battery x 1)
• FM: 87.5MHz - 108 MHz
• 150 MW
• 0.423 g
• 121×121×68 mm
• 0 to +50°C or 32 to 122°F
IMPORTANT:
16