GB
Mini Air Cooler Activejet Regular MKR-550B
FILTER REPLACEMENT:
1. Power off the device.
2. Gently press the release catch at the bottom of the front ventilation grille, pull the grille down and away from the device. Put it aside (fig. 7).
3. Grip the filter and carefully pull it out of the device (fig. 8).
4. Insert a new filter according to the markings on the filter (fig. 9).
5. Insert the upper part of the front ventilation grille and press the release catch back into its place (fig. 10).
Fig. 7
For optimal operation of the device, we recommend replacing the filter every 6 months. When the filter needs to be replaced, it is indicated
by an orange light on the water tank. After replacing the filter, press the reset button and hold for 3 seconds.
POSSIBLE FAULTS:
If the device is not working, first check the voltage in the power outlet.
Possible faults, causes, and remedies.
Fault
The device does not work.
Poor output of the device.
Abnormal sounds/clatter inside the device.
WARRANTY TERMS AND CONDITIONS:
1. The Air Cooler Activejet Regular MKR-550B comes with a 24 months warranty. The time covered by the warranty is calculated from the date
of purchase of the product.
2. The warranty covers defects caused by: factory material faults, possible faults in the device assembly on the production line
or manufacturing faults.
3. The warranty does not cover defects resulting from: use contrary to the purpose and recommendations of the Instruction Manual, overloading
the device leading to the damage of the engine or mechanical transmission components, making repairs on one's own or by unauthorized
persons, making construction changes, physical and chemical damage caused by external factors and damage caused by improper assembly
Fig. 8
Fig. 9
Cause
Remedy
1. No power supply.
1. Check the power supply; ensure
that the cable is connected to the
socket and not damaged.
2. The button on the control panel
2. Press the ON/OFF button
is switched off.
on the control panel.
1. The air filter is dirty or clogged.
1. Replace the filter according to the
instructions in this manual.
2. Air outlet blocked by a foreign
2. Remove foreign bodies from
body.
the air outlet.
1. Empty tank.
1. Refill the water tank.
2. Uneven surface.
2. Place the device on a level
surface.
3. Foreign body inside the device.
3. Remove any foreign body from
the device.
as well as mechanical damage.
4. The warranty does not cover parts subject to natural wear during operation: thermal fuses, electrographite brushes, V-belts, tool holders,
batteries, working tips of power tools.
5. The nameplate of the device should be legible. The claimed product should be carefully cleaned and protected against any damage in transit.
As far as possible, provide the device in the original packaging.
6. In order to make use of the warranty, you should report to the point of purchase along with the proof of purchase (receipt, invoice).
7. The warranty is carried out by the sole distributor and owner of the brand: Action SA, Zamienie, ul. Dawidowska 10, 05-500 Piaseczno, Poland.
MEANING OF THE SYMBOL:
A crossed out trash bin symbol means that the device should not be disposed of in normal waste containers.
It is the responsibility of the user to hand over the used equipment to the collection points for the recycling of waste
generated from electrical and electronic equipment.
Fig. 10
CE DECLARATION OF CONFORMITY:
The device has been manufactured in accordance with the applicable European standards, including the relevant directives and regulations
in force in the European Union for electrical products. This means that the product complies with the principles of safe use, health
and environmental protection.
Mini Air Cooler Activejet Regular MKR-550B
GB