hazard.
This appliance is equipped with a power cord with a three blade plug. Plug ONLY into a matching three
7.
blade outlet. DO NOT cut or break off the third blade or attempt to use with a two blade extension cord.
To prevent a possible fire, it is recommended that the unit is placed on a non-combustible surface.
8.
This appliance has electrical parts. Do not use it in areas where gasoline, paint, or flammable liquids are
9.
used or stored.
V.Preparation
Set the unit on a flat surface.
1.
Insert the Support Bar into the Stand.
2.
Adjust the Support Bar to appropriate height and insert the screw to fix the height.
3.
Insert the Upper Support Arm into Support Bar.
4.
Install bulbs with the appropriate wattage rating as indicated on the warmer.
5.
VI.Operation
Plug cord into grounded electrical outlet of the correct voltage. Electrical shock can occur if appliance is
1.
not grounded.
Place food products in a pan, located directly under the bulbs for best results.
2.
Turn unit off and unplug when not in use.
3.
To disconnect appliance, turn switch off and remove plug from power source.
4.
VII.Cleaning
NOTE: Proper maintenance plays an important part in the life span and functioning of the warmer. Do
not clean the bulbs, they should be replaced.
Unplug the cord and let warmer cool before cleaning or moving.
1.
This unit can be cleaned with a damp sponge and mild soap. Rinse with clean water and wipe dry.
2.
Do not immerse in water or other liquid.
3.
9