System Settings - auna iTuner 320 BT Manual De Instrucciones

SYSTEM SETTINGS

Press and hold the MENU/INFO button on the remote control to display
the menu. Turn the SCROLL/SELECT dial on the unit or the
buttons on the remote control to select System settings. Then press the
SCROLL&SELECT dial on the unit or the SELECT button on the remote
control to confirm.
Equalizer
This system supports a variety of equalizers and sound effects.
Press the EQ button to access the Equaliser menu.
Alternatively:
During System settings mode, press the
Equaliser and then press the SELECT button to confirm.
1. The display will show : NORMAL > CLASSIC > ROCK > POP > JAZZ > MY
EQ > MY EQ PROFILE SETUP
2. Press the
button to confirm.
3. For [MY EQ], please go to [My EQ Profile Setup] for custom setting
before select.
4. During [My EQ Profile Setup], press
and then press SELECT button to confirm. Press
desired level and then press SELECT button to confirm.
5. Press BACK button to exit and then press
and press SELECT button to confirm. The Display will show Equaliser
Saved.
Network
1. During System Settings mode, press the
Network and press the SELECT button to confirm.
2. Press the
then press the SELECT button to confirm.
Network wizard
PBC Wlan setup
View settings
buttons to select and then press the SELECT
⏮ / ⏭
buttons to select from the following settings, and
SSID – select the desire wireless network.
Rescan – Scan for available networks.
Manual config – select wireless network with
DHCP enable/disable.
Select WPS on the unit and press the WPS
button on the modem device that you
wish to connect with. Press SCROLL&SELECT
dial on unit or SELECT button on remote
control to continue.
Display the setting on the unit.
buttons to select
to select [Bass/Treble]
to select
buttons to select [YES]
buttons to select
EN
51