Orima ORCD 350 2P Manual De Instrucciones página 29

For model CD350 2P (see page ):
WARNING! Turn off the appliance and pull the plug out of the electricity supply socket.
1. Unscrew two screws 12 and remove the bottom bracket 13 together with the set of washers
11 on the axle and the spacer 10.
2. Unscrew two screws 12 and remove the bracket 15. Remove the bottom door 9.
3. Unscrew fixing screws 7 of the middle bracket. Remove the middle bracket 6 together with
washers on the axle and the spacer 5. Remove the top door 4.
4. Unscrew the axle 2 together with the nut 1 and washers 3 from the upper bracket and screw
all this set on the reverse side of the
door.
5. Take out the plugs 18 in the crossbar
zone and displace them on the reverse
side.
6. Before hanging the upper door, turn the
door over by 180
axle in the door.
7. Before screwing the middle bracket 6
with the set of washers and spacers on
the reverse side of the cabinet, insert the
bracket axle into the upper door;
8. Before hanging the bottom door on the
middle bracket axle, turn them over by
0
180 .
9. Unscrew fixing screws 16 from both of
door, remove handles 17 and fix them
screwing in free holes on the same side.
Plate 14 remains in its place.
10. Before screwing the bottom bracket 13
together with the set of washers and
spacers on the reverse side of a cabinet,
insert the bracket axle to the door.
11. Screw the bracket 15 on the reverse side
of a cabinet.
OPERATION PROBLEMS AND THEIR SOLUTIONS (TROUBLESHOOTING)
What if ...
 The appliance is plugged in to the mains but it does not work and the
electricity supply voltage indicator is not illuminated. Check that your house
electricity supply installations are in order. Check that the plug is correctly inserted
into the electricity supply socket.
 The noise has become louder. Check that the appliance is standing stable, on a
level place. To make it level, regulate the front feet. Check if the appliance is not
touching any furniture, and that no part of the refrigeration system at the back part
of the appliance body is touching the wall. Pull the appliance away from any furniture
or walls. Check that the cause of increased noise isn't due to bottles, cans or dishes
in the appliance that might be touching each other.
 Water has appeared at the bottom of the refrigerator compartment. Check
whether a thaw water channel space isn't blocked. Clean the thaw water channel
space with a cleaner intended for that purpose.
0
and insert the upper
27