! LED Status
LED
1 x 3 sec. Blue
1 x 1 sec. Blue
Blinking red
Red LED on
Red LED off
Red/Blue Blinking
USB Adapter and AT-BT110 Bluetooth Headset
Voice Over Internet Protocol (VoIP) Application
!
Install Software for Bluetooth USB Adapter from the CD-ROM provided in the USB Adapter
package. Note that the CD-ROM is not available in the AT-BT110 package.
!
Plug the USB Adapter USB Bluetooth Dongle (purchased separately) into the USB socket of a PC.
!
Download from the corresponding websites and install Skype, MSN messenger, Netmeeting,
Yahoo messenger, or ICQ application software in the PC.
!
Pairing: Put the AT-BT110 Bluetooth Headset into "pairing" mode. Start the Bluetooth software and
pair the USB Adapter Dongle with the AT-BT110 Headset. The Headset passkey is "0000".
!
Connecting and Disconnecting: please press the S1 key on the Headset to connect the USB
dongle. To disconnect the Bluetooth link, press the S1 key again.
!
Testing the Bluetooth Link: After the USB Adapter Dongle is connected with the AT-BT110
Headset, the PC audio will be automatically routed to the "Bluetooth Audio" driver. Play some
music on the PC by Windows Media Player or other music applications; you should be able to
hear the music on the Headset. If you can't hear it, then go the "control Panel"-> "Sound and
Audio Device Properties"-> "Audio"-> "Sound playback" select the "Bluetooth Audio" to activate
the link.
!
Now you can start using the VoIP application and talk to your friend through your Headset
wirelessly and freely.
!
Connecting AT-BT110 Bluetooth Headset back to your Bluetooth mobile phone. Please follow the
steps from 'Headset in Pairing Mode' to 'Establishing Bluetooth Link'.
All manuals and user guides at all-guides.com
Status
Ready can be accessed by paired devices
Talking
Battery low (max. 15 Minutes left)
Under charging
Fully charged
Pairing-Mode
7
In-Tech Electronics Ltd
Unit A, 13/F, Wing Tai Centre, 12 Hing Yip Street,
Kwun Tong, Kowloon, Hong Kong.
8