memorex MVD4544 Guia Del Usuario página 50

Check the following before requesting service.
SYMPTOM
POWER
No power.
Although the power
is on, the VCR does
not operate.
RECORDING
TV recording does
not work.
One-Touch record-
ing does not work.
The tape ejects after
pressing the REC button. prevention tab is broken off.
PLAYBACK
Noise bars appear
on the screen.
Cannot locate INDEX
marks.
Counter does not
count up or down.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM OR CONTACT CUSTOMER SERVICE AT (954) 660-7100.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO
RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR CONSUMER REPLACEABLE PART(S), SEE PART NUMBER(S) ON THE LOCATION OF
CONTROLS, PAGES 7-8, AND THEN CONTACT FOX INTERNATIONAL AT 1-800-321-6993.
All manuals and user guides at all-guides.com
TROUBLESHOOTING GUIDE (VCR SIDE)
POSSIBLE CAUSE
The AC power cord is not
connected.
Cassette is not inserted.
Moisture has condensed
on the heads.
The video cassette's erase
prevention tab is broken off.
The video cassette's erase
prevention tab is broken off.
The video cassette's erase
Video heads are dirty.
The tape is worn or damaged.
Tape is worn or damaged.
The tape is blank.
POSSIBLE SOLUTION
Connect the AC power cord to
the AC outlet.
Insert a video cassette.
Unplug and allow an hour or two
to dry out.
Place a piece of vinyl tape over
the hole.
Place a piece of vinyl tape over
the hole.
Place a piece of vinyl tape over
the hole.
Have the video heads cleaned.
Try another tape.
Try another tape.
Insert a prerecorded tape.
49